Pulse Oximetry FAQ

This FAQ has been compiled by our team of experts. Please submit your questions at the bottom of this page!

Pulse Oximetry FAQ How to use a pulse oximeter

Where on the body can pulse oximeters be used to measure SpO2?

The locations for placing pulse oximeters vary by the type of device and probes available, including whether it is a transmittance or a reflectance device. Transmittance devices shine light through a part of the body, so they must be placed on a relatively thin or translucent area such as a fingertip, earlobe, nose or the foot of an infant. It is important that the body part is placed far enough into the probe so that the light shines through the tissue rather than to the side of it. Reflectance devices do not require light to pass through tissue, so they can be placed in a variety of locations including the patient’s forehead, wrist, foot, or chest.

References: Lifebox Pulse Oximetry Learning Module

Keywords: body part, location, placement, finger

You have additional questions?

Submit a question

About Community Device Data Raw Data Protocols Publications FAQ

Healthy Human Performance Tests

To meet ISO standards (80601-2-61) or FDA guideline adherence for clinical use, pulse oximeter performance must be tested in healthy humans in a laboratory setting. Independent device testing for the Open Oximetry Project follows our protocol consistent with ISO and FDA. Only devices labeled as ‘verified’ or ‘disputed’ have been independently tested by the Open Oximetry Project.
All other devices listed show data from manufacturers or published literature and have not been confirmed by the Open Oximetry Team. Scoring criteria will be modified based on evolving data on this topic. See the table below for scoring criteria for this category:

No Data

No Data

1 (red)

>4%

2 (red)

<4%

AND/OR Data suggesting Arms for dark skin color of >4%

AND/OR Data suggesting Arms for PI<1 in dark or light skin color of >4%

3 (yellow)

<4%

AND/OR Data suggesting Arms for dark skin color of 3-4%

AND/OR Data suggesting Arms for PI<1 in dark or light skin color of 3-4%

4 (green)

<3%

AND No data for or against performance problems in darker skin colors

AND No data for or against performance problems in low perfusion

5 (green)

<3%

AND Extended testing beyond ISO/FDA recommendations Criteria TBD April 2023

AND Extended testing beyond ISO/FDA recommendations Criteria TBD April 2023

* only independently tested devices by OpenOximetry (Hypoxia Lab and Clinimark) get labeled as ‘verified’